Step-by-Step Guide- How to Install a Kwikset Door Lock for Enhanced Security_1

How to Install Kwikset Door Lock: A Step-by-Step Guide

Installing a Kwikset door lock can be a straightforward process, providing you follow the right steps and have the necessary tools. Whether you’re upgrading your home security or replacing a faulty lock, this step-by-step guide will help you install your Kwikset door lock with ease.

Step 1: Gather the necessary tools and materials

Before you begin, make sure you have the following tools and materials:

– Kwikset door lock
– Screwdriver
– Pliers
– Lock installation template
– Level
– Drill (if necessary)
– Lock installation kit (if included with your Kwikset lock)

Step 2: Remove the old lock

Start by removing the old lock from the door. To do this, you’ll need to:

1. Remove the interior faceplate by unscrewing the screws.
2. Take out the cylinder assembly by sliding it out of the door.
3. Unscrew the strike plate from the door frame and remove it.
4. If necessary, remove the strike plate from the door jamb by unscrewing the screws.

Step 3: Measure and mark the new strike plate location

Using the Kwikset lock installation template, place it on the door frame and align it with the pre-drilled holes. Mark the holes with a pencil to ensure the new strike plate is installed in the correct location.

Step 4: Install the new strike plate

1. Hold the strike plate against the door frame and align the holes with the marks you made in the previous step.
2. Insert the screws through the strike plate and into the door frame, ensuring they are tight.
3. If your door frame is not perfectly square, use shims to fill in any gaps and ensure the strike plate is level.

Step 5: Install the lockset

1. Place the interior door handle on the door and align the holes with the pre-drilled holes in the door.
2. Insert the screws through the door handle and into the door, ensuring they are tight.
3. Place the exterior door handle on the door and align the holes with the pre-drilled holes in the door.
4. Insert the screws through the exterior door handle and into the door, ensuring they are tight.

Step 6: Install the cylinder and handle

1. Insert the cylinder into the door handle and align the holes with the pre-drilled holes in the door.
2. Insert the screws through the cylinder and into the door, ensuring they are tight.
3. Place the interior door handle on the cylinder and align the holes with the pre-drilled holes in the door.
4. Insert the screws through the interior door handle and into the cylinder, ensuring they are tight.

Step 7: Test the lock

After installing the Kwikset door lock, test it to ensure it functions correctly. Turn the key to lock and unlock the door, and make sure the handle operates smoothly.

Congratulations! You’ve successfully installed your Kwikset door lock. With this new security measure in place, you can enjoy peace of mind knowing your home is better protected.